Machining
CNC lathe
Use the EMCO Concept Turn 60 CNC lathe to control basic machining operations such as turning and drilling with computer software.
- Travel: 60 x 280 mm
- Bar diameter: 15 mm
- Maximum part length with tailstock: 60 mm
- Maximum part length: 215 mm
- Swing over bed: 130 mm
- Number of tools on turret: 8
- Quill travel: 35 mm
- Tool cross-section for outer machining: 12 x 12
- Tool cross section for inner machining: Ø 10
Manufacturer: EMCO
Required training: General Maker Training, CNC Lathe
CNC mill
Computer software will control the milling operations when you remove material from your workpiece using the EMCO Concept Mill 55.
- Travel: 190 x 140 x 260 mm
- Distance spindle nose: 77-337 mm
- Clamping area: 420 x 125 mm
- Maximum table load: 10 kg
- Number of tools on milling spindle: 8
Manufacturer: EMCO
Required training: General Maker Training, CNC Mill
CNC router
The Multicam M1212 CNC router is used for the computer-controlled cutting of various materials including wood, metals, glass and foams.
- Process area: 1200 x 1200 mm
Manufacturer: Multicam
Required training: General Maker Training, CNC Mill
Manual lathe
The Colchester manual lathe is used to cut, sand, knurl, drill and turn metal. It removes material by rotating the clamped workpiece against a stationary cutting tool.
- Swing over bed: 330 mm
- Spindle bore: 40 mm
- Maximum length of workpiece: 1000 mm
Manufacturer: Colchester
Required training: General Maker Training, Manual Lathe
Manual mill
Use the First manual mill’s rotating cutter to remove material from a flat, curved or irregular metal surface by feeding a rotating multi-toothed cutter into the moving workpiece.
- Travel: 762 x 305 x 406 mm
- Table work surface: 1067 x 230 mm
- Maximum load: 200 kg
Manufacturer: First
Required training: General Maker Training, Manual Mill